Siemens SiPass integrated, Reference Manual, Page: 25 / 66

Manual Override
6
A6V11144326 25 | 66
Type Command Description
Set Mode “Card and
PIN”
Sets the point’s operation mode to “Card and PIN”.
Set Mode “Card Only” Sets the point’s operation mode to “Card Only”.
Set Mode “D.R. Card
and PIN”
Sets the point’s operation mode to “Delayed
Reporting Card and PIN”.
Set Mode “D.R. Card
Only”
Sets the point’s operation mode to “Delayed
Reporting Card Only”.
Set Mode “Disabled” Sets the point’s operation mode to “Disabled”.
Set Mode “H.V. Card
and PIN”
Sets the point’s operation mode to “Host
Verification. Card and PIN”.
Set Mode “H.V. Card
Only”
Sets the point’s operation mode to “Host
Verification Card Only”.
Set mode “No Dual
Custody”
Disables Dual Custody for the access point.
Set mode
“Programmable
Authorization – Card
+ PIN”
Sets the point’s operation mode to “Programmable
Authorization – Card + PIN”.
Set mode
“Programmable
Authorization – Card
Only”
Sets the point’s operation mode to “Programmable
Authorization – C ard Only”.
Set mode “Standard
Dual Custody”
Set the access point to Standard Dual Custody
Mode.
Set mode
“Supervisory Dual
Custody”
Set the access point to Supervisory Dual Custody
Mode.
Set Mode “V.O. Card
and PIN”
Sets the point’s operation mode to “View Only.
Card and PIN”.
Set Mode “V.O. Card
Only”
Sets the point’s operation mode to “View Only Card
Only”.
Unblock Door Turns off the block door command. Returns the
door to its normal programmed mode of operation.
Unlock Door The door latch will be unlocked until the next “lock”
command is received.
Input Cancel Permanent
Action
Any current Permanent Command or Event Task,
or Access/Internal Action operating on the point will
be cancelled. The next Control State in the Control
State Queue will take effect.
Isolate External intrusion areas will ignore the state of
inputs that are isolated, for the purposes of arming.
This is only applicable for external intrusion input
points.
Pulse Sends a pulse command to the selected Input. This
is only applicable for Sintony input points of type
“Serial Coms Input”
Return to Time
Schedule Control
The input point will return to normal Time Schedule
control.
Secure (Enable) Enables the input, if it is currently disabled, until the
next change in Time Schedule.