Siemens SIPART PS2 6DR50 Series, Manual

Page: 123 / 160

Operation
123
SIPART PS2 Manual
A5E00074631--06
No. Reset
possible
Unit Values than
can be
indicated
Meaning Abbre-
viation
21 P100 P otentiometer value upper stop ( 100 %) 0.0 to 100.0 %
22 IMPUP Pulse length up ( Imp ulse Length Up ) 2 to 160 ms
23 IMPDN Pulse length down ( Imp ulse Length D ow n ) 2 to 160 ms
24 DBUP Dead zone up ( D ead B and Up ) 0.1 to 10.0 %
25 DBDN Dead zone down ( D ead B and D ow n ) 0.1 to 10.0 %
26 SSUP Short step zone up ( S hort S tep Zone Up ) 0.1 to 100.0 %
27 SSDN Short step zone down ( S hort S tep Zone D ow n ) 0.1 to 100.0 %
28 TEMP Current temp erature --40 to 85
_
C
29 TMIN Min imum t emperature (“min/max pointer”) --40 to 85
_
C
30 TMAX Max imum t emperature (“min/max pointer”) --40 to 85
_
C
31 T1 Number of operating hours in t emperature range 1 0 to 4.29E9 hours
32 T2 Number of operating hours in t emperature range 2 0 to 4.29E9 hours
33 T3 Number of operating hours in t emperature range 3 0 to 4.29E9 hours
34 T4 Number of operating hours in t emperature range 4 0 to 4.29E9 hours
35 T5 Number of operating hours in t emperature range 5 0 to 4.29E9 hours
36 T6 Number of operating hours in t emperature range 6 0 to 4.29E9 hours
37 T7 Number of operating hours in t emperature range 7 0 to 4.29E9 hours
38 T8 Number of operating hours in t emperature range 8 0 to 4.29E9 hours
39 T9 Number of operating hours in t emperature range 9 0 to 4.29E9 hours
40 VENT1 Number of switching operations pilot val lve 1 0 to 4.29E9 --
41 VENT2 Number of switching operations pilot val lve 2 0 to 4.29E9 --
42 STORE Save current values as “last maintenance”
(press increment button for 5s) ( Store )
-- --
43 PRUP Prediction up 1 to 40 --
44 PRDN Prediction down 1 to 40 --
45 WT00 Number of operating hours in actuating range WT00 0 to 4.29E9 hours x
46 WT05 Number of operating hours in actuating range WT05 0 to 4.29E9 hours x
47 WT10 Number of operating hours in actuating range WT10 0 to 4.29E9 hours x
48 WT30 Number of operating hours in actuating range WT30 0 to 4.29E9 hours x
49 WT50 Number of operating hours in actuating range WT50 0 to 4.29E9 hours x
50 WT70 Number of operating hours in actuating range WT70 0 to 4.29E9 hours x
51 WT90 Number of operating hours in actuating range WT90 0 to 4.29E9 hours x
52 WT95 Number of operating hours in actuating range WT95 0 to 4.29E9 hours x
53 mA Setpoint current 0.0 to 20.0 mA
Table 4-1 Overview of diagnosis values
4.5.2 Meaning of the diagnosis values
Number of strokes
During operation, the actuator movements are added up and can be
read off here as the number of strokes. Unit: 100% strokes, i.e. the
path between 0 and 100 % and back. The value is written into a
non-volatile memory every 15 minutes. It can be set to zero with the
increment button
.
Number of changes of direction
1 STRKS
2 CHDIR