Siemens SINUMERIK 840Di sl/840D sl Function Manual Download Page 84

Page: 84 / 250

3 Setting up functions

08/2008

3.1 Maintenance

3-84

ePS Network Services, Function Manual (FH) - Release 08/2008

Configuring variable

The system provides a selection of predefined variables which can be added to the
variable monitor configuration simply by selecting them.

Fig. 3-5: Variable monitor – configure variables

Field Content

Type

Open the form to configure a new vari-
able

ACTION

Edit the configuration of a freely defined
variable

ACTION

Name

Name of the variable

DISPLAY

Axis

With variables that refer to an axis, the
name of the machine axis is displayed
here.
The reference to an axis can be
changed as long as no data was cap-
tured for this variable.

DISPLAY
SELECTION

[ ]

The unit for the variable is displayed in
this column.

DISPLAY

This function is used to create a copy of
the variable.

ACTION

Remove the variable from the configu-
ration and delete the data for this vari-
able

ACTION

Summary of Contents for SINUMERIK 840Di sl/840D sl
























































































































































































































































Search results

Summary of Contents for SINUMERIK 840Di sl/840D sl

Reviews:

Related manuals for SINUMERIK 840Di sl/840D sl

Brands by name

Popular brands

Siemens SINUMERIK 840Di sl/840D sl, Function Manual

Search results

Summary of Contents for SINUMERIK 840Di sl/840D sl

Reviews:

Related manuals for SINUMERIK 840Di sl/840D sl

Brands by name

Popular brands