08/2008
5 Statistics/export
5.1 Multi-machine views
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 08/2008
5-177
Fig. 5-7: Comparing measurement series in the selected measurement series group
In an overview, the system shows all measurement series examined in one com-
parison grouped by machines. In this overview, the selection of the measurement
series to be examined in the comparison function can be changed. The system will
make a preselection, to the effect that from each machine only one measurement
series will be considered for displaying. The criteria for this preselection is the
number of measurements contained in the measurement series. For each ma-
chine, the measurement series with the most measurements will be marked as se-
lected. By selecting, this preselection can be overwritten at will.
Displaying measurement series
In order to display measurement series in a diagram, the machine operator must
select the required characteristic from the table. The system will then generate a
diagram showing the progress in time of the selected characteristic for each of the
measurement series considered in the comparative display. There are various
functions available for changing the diagram or displaying detailed information.
Function Description
Machines
In the "Machines" table, all measurement series consid-
ered in the comparative function will be listed according to
machine. Individual measurement series can be excluded
from being displayed in the diagram or included again.
Characteristics
The table shows the characteristics that are calculated for
the examined type of measurement series. For displaying
in the diagram, a characteristic needs to be selected.