manualshive.com logo in svg

Siemens SINAUT MD741-1, System Manual, Page: 38 / 150

Share
Download
Siemens SINAUT MD741-1 System Manual Download Page 38

3 Configuration 

 

SINAUT MD741-1 

38 

C79000-G8976-C236-05  

Create profile 

Saves the current settings of the SINAUT MD741-1 in a configuration profile.  

First enter a name for the profile in the input box. 

Create

 saves the settings in a 

profile with this names and then displays them in the table of saved configuration 
profiles. 

List of saved configurationprofiles 

This list displays all the configuration profiles stored on the SINAUT MD741-1. The 
three buttons next to the profiles have the following functions:. 

●

 

"Activate" button 

The SINAUT MD741-1 adopts the settings from the selected configuration 
profile and continues to work with it. 

●

 

"Download" button 

Dialog for saving the configuration profile of the SINAUT MD741-1 on the 
Admin PC. 

●

 

"Delete" button 

The configuration profile is deleted.

 

●

 

Default configuration 

The "Standard configuration" profile contains the factory settings. The profile 
cannot be saved or deleted.

 

 

 

3.8 

Changing the password 

Access to the SINAUT MD741-1 is protected by an access password. This access 
password protects access both via the  

●

 

local interface to the Web user interface, and 

●

 

via the local interface to the SSH console, 

and also access via 

●

 

EGPRS or GPRS by https to the Web user interface, and 

●

 

EGPRS or GPRS to the SSH console 

 

Summary of Contents for SINAUT MD741-1























































































































































Reviews:

No comments