7 VPN connection
SINAUT MD741-1
C79000-G8976-C236-05
103
Client IP address
Enter here any unused IP address of the local network related to the VPN
connection.
Factory settings
The factory settings for the SINAUT MD741-1 are as follows:
Enable VPN supervision
Nein
Interval for connection check (minutes)
5
Waiting time before repetition (minutes)
1
Number of unsuccessful connection checks
up to restarting the VPN client
3
7.7
Advanced settings for VPN connections
Setting special timeouts and intervals for VPN connections.
Figure 7-12
IPsec VPN > Advanced Settings
Keepalive interval for NAT-T (seconds)
If NAT-T is enabled, then keepalive data packets will be sent periodically by the
SINAUT MD741-1 through the VPN connection. The purpose of this is to prevent a
NAT router between the SINAUT MD741-1 and the remote station from interrupting
the connection during idle periods without data traffic.
Here you can change the interval between the keepalive data packets.
