3 Configuration
SINAUT MD741-1
C79000-G8976-C236-05
29
Note
Because the device can only be administered via encrypted access, it is delivered
with a self-signed certificate. In the case of certificates with signatures that the
operating system does not know, a security message is generated. You can
display the certificate.
It must be clear from the certificate that it was issued for SIEMENS AG. The Web
user interface is addressed via an IP address and not using a name, which is why
the name specified in the security certificate, is not the same as the one in the
certificate.
Entering the user name and password
3. You will be asked to enter the user name and the password:
Figure 3-3
Enter user name and password
The factory settings are:
User name:
admin
Password:
sinaut
Note
You should change the password in any event. The factory settings are general
knowledge and does not provide sufficient protection. Chapter 3.8 contains a
description of how to change the password.