5.2
Tools required
You require the following tools for mounting and installation:
● Wrench or socket wrench, width across the flats 10, 13, 16/17, 18/19
● Allen key, size 8
● Torque wrench up to 50 Nm
● Screwdriver, size 2
● Torx T20 and T30 screwdrivers
5.3
Removing transport rails
Support rails for crane transportation are attached to the bottom of the cabinet.
To remove the rails, remove the fixing screws
①
with an M12 spanner.
Figure 5-1
Removing the support rails
5.4
Screwing the transport units together
NOTICE
Material damage caused by mechanical pressure on components
Stress that occurs during transport may exert mechanical pressure on the components.
Material damage can result.
● Line the cabinets up precisely with each other in order to avoid shearing forces when the
base units are screwed together.
● Install the converter only on a level and horizontal surface.
Installation
5.4 Screwing the transport units together
SINAMICS SM150 6SL3810-7NN38-0AA1
84
Operating Instructions Rev.201910281406 EXAMPLE
