background image

To parameterize a measuring input:   
1. In the project navigator under the MEASURING INPUTS folder, find the measuring input 

technology object (TO) that you want to parameterize. Double-click the measuring input to 

display the associated objects.

2. Double-click Configuration or Default in the project navigator. The window appears on the 

workspace.
– Configuration (see chapter Configuring a measuring input):

Define the configuration data of the measuring input here. This includes, for example, 

the processing cycle clock.   

– Default (see chapter Measuring input defaults):

Define the measuring input defaults of the system variables here. These include the 

edge, start of measuring range, and end of measuring range.   

3. Change configuration data and measuring input defaults.
4. Click Close to accept the changes.
5. Repeat steps 2 to 4 for all objects in which you want to change the configuration data and 

defaults.

See also

Measuring Input Configuration (Page 154)
Measuring input defaults (Page 160)

5.3.3

Use Expert List for Measuring Inputs

Parameters required for standard SIMOTION applications (configuration data and system 

variables) are parameterized into the output cam technology object directly by means of screen 

forms or are defined automatically.

It may be necessary to change automatically defined parameters for special SIMOTION 

applications. These configuration data and system variables can only be displayed and 

changed in the expert list. 

 

 

Note
You will find more information on working with the expert list in the 

SIMOTION Runtime Basic 

Functions functional description.

 

 

5.3.4

Measuring Input Configuration

5.3.4.1

Measuring Input Configuration

In the Configuration window, define the configuration data values for the measuring input.     

Measuring Input TO - Part III
5.3 Configuring the Measuring Input technology object

Output Cams and Measuring Inputs

154

Function Manual, 04/2014

Summary of Contents for SIMOTION



























































































































































































Reviews: