manualshive.com logo in svg

Siemens SIMOTION P320-4 E, Manual, Page: 22 / 166

Share
Download
Siemens SIMOTION P320-4 E Manual Download Page 22

Security and networks

Note
You will find information on the security of networks in Section General security measures 

(Page 26).

Remote desktop connection

Note that for the SIMOTION P320-4 with Headless operation, you require a user name and 

password for a remote desktop connection. Per default, the remote desktop connection is 

already set up.

Note
Deactivating the remote desktop connection
If you do not use the remote desktop connection, it must be deactivated for security reasons. 
See Section Deactivating the remote desktop connection (Page 45)

SIMOTION IT

Note
Security concept
Note the security concept of HTTP/S, FTP and Telnet access on the Web server when working 

with SIMOTION IT.
You will find information in the SIMOTION IT Diagnostics and Configuration Diagnostics 

Manual or the SIMOTION online help in Section Security concept.

Note
User administration
Note the information on the user administration when working with SIMOTION IT.
You will find information in the SIMOTION IT Diagnostics and Configuration Diagnostics 

Manual or the SIMOTION online help in Section User administration.

Industrial security
2.1 Security concept for SIMOTION P320-4

SIMOTION P320-4 E / P320-4 S

22

Manual, 03/2018, A5E36004933B

Summary of Contents for SIMOTION P320-4 E







































































































































































Reviews:

No comments