Siemens SIMOTION P320-4 E Page 103 Manual Download

Page: 103 / 166

Installation/mounting

6.1

Installing the device

SIMOTION P320-4 is particularly suitable for installation in consoles, control cabinets and

switchboards.

WARNING

Perform function test while installing the device in machines or plants
Following the results of a risk analysis, additional protection equipment on the machine or

the system is necessary to avoid endangering persons. With this, especially the programming,

configuration and wiring of the inserted I/O modules have to be executed, in accordance with

the necessary risk analysis identified safety performance (SIL, PL or Cat.). The intended use

of the device has to be secured.
The correct use of the device has to be verified with a function test on the system. This test

can detect programming, configuration and wiring errors. The test results have to be

documented and if necessary inserted into the relevant inputs.

SIMOTION P320-4 E / P320-4 S

Manual, 03/2018, A5E36004933B

103

Summary of Contents for SIMOTION P320-4 E







































































































































































Search results

Summary of Contents for SIMOTION P320-4 E

Reviews:

Related manuals for SIMOTION P320-4 E

Brands by name

Popular brands

Siemens SIMOTION P320-4 E, Manual

Search results

Summary of Contents for SIMOTION P320-4 E

Reviews:

Related manuals for SIMOTION P320-4 E

Brands by name

Popular brands