Fundamental safety instructions
1.1 General safety instructions
1FK7 G2 synchronous motors
14
Operating Instructions, 05/2021, A5E50907562B AA
WARNING
Unexpected movement of machines caused by inactive safety functions
Inactive or non-adapted safety functions can trigger unexpected machine movements that
may result in serious injury or death.
•
Observe the information in the appropriate product documentation before
commissioning.
•
Carry out a safety inspection for functions relevant to safety on the entire system,
including all safety-related components.
•
Ensure that the safety functions used in your drives and automation tasks are adjusted
and activated through appropriate parameterizing.
•
Perform a function test.
•
Only put your plant into live operation once you have guaranteed that the functions
relevant to safety are running correctly.
Note
Important safety notices for Safety Integrated functions
If you want to use Safety Integrated functions, you must observe the safety notices in the
Safety Integrated manuals.
WARNING
Active implant malfunctions due to electromagnetic fields
Electromagnetic fields (EMF) are generated by the operation of electrical power equipment,
such as transformers, converters, or motors. People with pacemakers or implants are at
particular risk in the immediate vicinity of this equipment.
•
If this affects you, maintain the minimum distance to such equipment that is specified in
the "Intended use" chapter.
WARNING
Active implant malfunctions due to permanent-magnet fields
Even when switched off, electric motors with permanent magnets represent a potential risk
for persons with heart pacemakers or implants if they are close to converters/motors.
•
If this affects you, maintain the minimum distance to such equipment that is specified in
the "Intended use" chapter.
•
When transporting or storing permanent-magnet motors always use the original packing
materials with the warning labels attached.
•
Clearly mark the storage locations with the appropriate warning labels.
•
IATA regulations must be observed when transported by air.
