Description of the blocks
4.7 MMRevDhl motor block
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
217
The operator permissions control operation only in the faceplate.
Table 4- 103 Operator permissions – MMRevDhl
OS_Perm
bit
OS_PermOut
bit
OS_PermLog
bit
Description
0
0
0
1 = Operator is permitted to change to AUTO
mode.
1
1
1
1 = Operator is permitted to change to
MANUAL mode.
2
2
2
1 = Operator is permitted to change to Local
mode.
3
3
3
1 = Operator is permitted to change to "Out of
service" mode
4
4
4
1 = Operator is permitted to stop the motor
5
5
5
1 = Operator is permitted to start the motor
(forward) On>
6
6
6
1 = Operator is permitted to start the motor
(reverse) On>
7
7
7
1 = Operator is permitted to start the motor
(fast forward) On>>
8
8
8
1 = Operator is permitted to start the motor
(fast reverse) On<<
9
9
9
1 = Operator is permitted to reset the motor
10
10
10
1 = Operator is permitted to define the
monitoring time for startup
11
11
11
1 = Operator is permitted to define the
monitoring time for runtime
12
12
12
1 = Operator is permitted to activate the
monitoring time function (Bit10, Bit11)
13
13
13
1 = Operator is permitted to activate the
Simulation function
14
14
14
1 = Operator is permitted to activate the
maintenance release function
15...25
15...25
15...25
Reserved
26
26
26
1 = Operator can change the simulation value
SimAV
27...29
27...29
27...29
Reserved
30
30
30
1 = Operator can define the monitoring time
for control stop
31
31
31
1 = Operator can execute the rapid stop
