Siemens SIMOCODE pro, Programming And Operating Manual

Page: 124 / 286

Description of the blocks
4.3 MMOprtn block
SIMOCODE pro PCS 7 Library V9.0
124
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Pole-changing starter control function
Table 4- 33 Pole-changing starter – Process image inputs and outputs
Bit MMOprtn – output pa-
rameters
PII – Meaning PIO – Meaning
Bit 0.0 FbkOut1 Status – ON >> PLC/PCS [DP] → ON >>
Bit 0.1 FbkOut2 Status – OFF PLC/PCS [DP] → OFF
Bit 0.2 FbkOut3 Status – ON > PLC/PCS [DP] → ON >
Bit 0.3 PreWrnOvl Event – Prewarning overload
(I>115 %)
Test 1 – Input
Bit 0.4 ChgOvrAct Status – Change-over pause
active
Emergency start – Input
Bit 0.5 LocalAct Status – Remote mode Mode selector S1
Bit 0.6 GenFlt Status – General fault Reset 1 – Input
Bit 0.7 GenWarn Status – General warning –
Bit 1.0 – – –
Bit 1.1 – Event – Feedback test posi-
tion
–
Bit 1.2 – – –
Bit 1.3 – – –
Bit 1.4 – – –
Bit 1.5 – – –
Bit 1.6 – – –
Bit 1.7 – – –
Byte 2 PZDIn23 Maximum current I_max –
Byte 3 PZDIn23 Maximum current I_max –
Byte 4 – – –
Byte 5 – – –
Byte 6 – – –
Byte 7 – – –
Byte 8 – – –
Byte 9 – – –