Siemens SIMATIC S5 Series, Manual

Page: 66 / 109

S5-95U, Second Serial Interface ASCII Driver
The different error messages are listed and explained in the following table.
Table 4-1 Error Messages in the Coordination Bytes
Response Meaning
Data valid until time
exceeded
Data rejected
Assignment
KBS
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
07
H
0D
H
11
H
13
H
KBE
03
H
05
H
07
H
09
H
*
0B
H
0F
H
01
H
1B
H
1B
H
Output buffer is full
Parameterizing error
Send mailbox not available
Frame is too long
Parity error Data rejected
Receiving after XOFF
Input buffer full
Too many frames received
Frame is larger than receive mailbox
Receive mailbox is not available
Character delay time exceeded
Break
Data valid,
subsequent frames
rejected
Data rejected
Break
* In the case of bit 7 KBE=0 (receiving not possible because e.g. the PLC is in STOP mode), up to 100 frames can be stored
in the input buffer (a maximum of +1024 bytes).
You parameterize the position of the coordination bytes in DB1 ( Section 4.4).
EWA 4NEB 812 6095-02
4-7