manualshive.com logo in svg

Siemens SIMATIC RTLS, System Manual

Share
Download
Siemens SIMATIC RTLS System Manual Download Page 92

Installation with support - Corner installation

Follow the steps below to mount the device to a corner:
1. Use the corner support as template and draw the bore holes on the corner.
2. Drill the holes with a suitable device.
3. Insert the matching anchors in the holes. (Anchors are not supplied with the device.)
4. Mount the corner support to the corner.
5. Mount the device to the corner support using the screws (M4). (Screws are not supplied with 

the device.)

Installation with support - Mast mounting

Follow the steps below to mount the device to a mast:
1. Use the mast mount as template and draw the bore holes on the mast.
2. Drill the holes with a suitable device.
3. Insert the matching anchors in the holes. (Anchors are not supplied with the device.)
4. Install the mast mount to the mast.
5. Install the device to the mast mount using the screws (M4). (Screws are not supplied with 

the device.)

Note
If drilling is not possible, you can also fasten the mast mount to the mast with cable ties, for 

example.

6.2.2.3

Ethernet

When installing and connecting the Ethernet connection, observe the applicable general 

conditions and their legal basis.
The Ethernet connection is connected to the Ethernet socket of the device. The cable must be 

connected to the RJ45 plug before connection to the socket.
For the supply voltage of the device over PoE, a corresponding infrastructure such as PoE 

injector or PoE switch is required.

6.2.2.4

Cleaning and maintenance

The device may only be opened by suitably trained and qualified personnel. Only authorized 

dealers are permitted to repair the device.
Unauthorized opening of and improper repairs to the device may cause substantial risks to the 

user. As soon as the device was opened without permission, warranty and liability of the 

Siemens AG are rendered null and void.
Do not clean the enclosure with abrasive, alkaline or aggressive cleaning products or aids. 

Gateways
6.2 SIMATIC RTLS4330G

92

System Manual, 04/2019, C79000-G8976-C577-01

Summary of Contents for SIMATIC RTLS













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands