manualshive.com logo in svg

Siemens SIMATIC RTLS, System Manual

Share
Download
Siemens SIMATIC RTLS System Manual Download Page 59

5.4.1.6

Troubleshooting

Error detection

Cause of the error

Troubleshooting

Device does not respond, all LEDs are 

off

The device is not connected or the pow‐

er supply unit is not switched on.

Check the supply voltage of the device.

The red LED (POWER) flashes once 

per second.

Undervoltage on the device

Check the supply voltage of the device.

The yellow LED (RADIO) is off.

Device is not connected to the Locating 

Manager.

Switch on Locating Manager.

5.4.2

Installation & Operation

5.4.2.1

Notes on installation

Before you install the devices, read this section carefully to ensure trouble-free installation and 

operation.
The devices can only be used in conjunction with the RTLS localization system. Setup, 

installation and use of the tools and clients of the RTLS localization system are described in the 

corresponding manuals.
The device is intended for fixed installation on walls or ceilings. Installation is to be performed 

by qualified and trained personnel according to the operating instructions. In addition, the 

device must be installed according to the currently applicable BG regulations "Electrical 

installations and equipment" (BGV A3). The devices must be installed so that they are 

accessible for future maintenance, e.g., for opening the enclosure cover.
Note the specifications in the section "Technical specifications" during installation and 

operation. Ensure that all screws are securely and firmly screwed into the wall / ceiling and can 

support the weight of the device and its wiring.
Make sure that the ambient temperature does not exceed 60 °C and that the device is not 

installed at a location where it is exposed to direct sunlight. 

Connection of the cables

Make sure that the Twist-Lock connectors are inserted correctly to prevent moisture from 

entering the enclosure.
Make sure that the wiring is correct before you start up the device.
Only use the cables described in the manual, supplied with the device or otherwise prescribed. 

SIEMENS AG is not liable for damages or functional limitations caused by the use of other 

cables.
Protect the device from penetrating moisture by closing off connectors that are not in use with 

suitable covers. These covers are installed on the device.

Anchors

5.4 SIMATIC RTLS4430A

System Manual, 04/2019, C79000-G8976-C577-01

59

Summary of Contents for SIMATIC RTLS













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands