Siemens SIMATIC RF610M, Function Manual

Page: 56 / 80

RFID Reader Interface Reference
3.4 IRfReaderApi
Mobile Readers
56
Function Manual, 12/2010, J31069-D0198-U001-A2-7618
3.4.16 SetTagMemory
SetTagMemory(tagID : string, memoryBank : uint,
startAddress : uint, dataLength : uint,
password :string, buffer : byte[]) : void
Parameters
● tagID
The ID of a tag whose data are to be modified, given as a hexadecimal encoded string.
● memoryBank
The memory bank (0 - 3) to which data are to be written.
Valid Values for the air protocol 'ISO18000-6B,'
0 – USER MEM
Valid values for the air protocol ‘EPCC1G2’ are:
0 – Reserved
1 – EPC,
2 – TID and
3 – USER MEM.
Valid values for the air protocol ‘RF300’”are:
0 – Memory
Valid values for the air protocol ‘ISO15693’ are:
0 – Memory
● startAddress
The base address within the memory bank to which data are to be written.
Base addresses are specified in bytes.
● dataLength
The length in bytes of the data to be written.
● Password
An access password if needed. The ISO18000-6B e.g. protocol does not support a
password. So just supply an empty string.
A password is a hexadecimal encoded string of up to eight characters.
● Buffer
The data to be written as a stream of bytes.
Return value(s)
None.
Exceptions
RfReaderApiException
Error while communicating with the reader service. Check the Error
member for more information.