Siemens SIMATIC RF610M Function Manual Download Page 51

Page: 51 / 80

RFID Reader Interface Reference

3.4 IRfReaderApi

Mobile Readers
Function Manual, 12/2010, J31069-D0198-U001-A2-7618

Note

ETSI channels are only relevant for reader with ETSI profile.
While the RF680M supports no frequency hopping only one channel must be defined.

Otherwise the function will rise a RfReaderApiException.

Version information

Supported in RFID Reader Interface since V1.3

3.4.12

GetChannelList

GetChannelList ( ) : string

Parameters

None

Return value(s)

This function returns the used ETSI channels as a coma separated list. Valid channels are

103,106,109,112.

Exceptions

RfReaderApiException

Error while starting the communication with the reader. Check

the Error member for more information.

Note

ETSI channels are only relevant for reader with ETSI profile.

Version information

Supported in RFID Reader Interface since V1.3

3.4.13

SetTagID

SetTagID(currentTagID : string, newTagID : string, password

:string) : void

Summary of Contents for SIMATIC RF610M

















































































Search results

Summary of Contents for SIMATIC RF610M

Reviews:

Related manuals for SIMATIC RF610M

Brands by name

Popular brands

Siemens SIMATIC RF610M, Function Manual

Search results

Summary of Contents for SIMATIC RF610M

Reviews:

Related manuals for SIMATIC RF610M

Brands by name

Popular brands