Siemens SIMATIC RF610M Function Manual Download Page 53

Page: 53 / 80

RFID Reader Interface Reference

3.4 IRfReaderApi

Mobile Readers
Function Manual, 12/2010, J31069-D0198-U001-A2-7618

3.4.14

GetTagIDs

GetTagIDs() : string[]

Parameters

None

Return value(s)

Returns an array of strings that contains the read tag IDs. The tag IDs are returned in a plain

hexadecimal encoded string (i.e., each byte is represented by a two-letter hexadecimal

number).

Exceptions

RfReaderApiException

Error while communicating with the reader service.

Check the Error member for more information.

Note

This method executes a read operation on the reader and returns the IDs of all the

recognized tags as an array of strings.

Version information

Supported in RFID Reader Interface: since V1.0

Summary of Contents for SIMATIC RF610M

















































































Search results

Summary of Contents for SIMATIC RF610M

Reviews:

Related manuals for SIMATIC RF610M

Brands by name

Popular brands

Siemens SIMATIC RF610M, Function Manual

Search results

Summary of Contents for SIMATIC RF610M

Reviews:

Related manuals for SIMATIC RF610M

Brands by name

Popular brands