Siemens SIMATIC RF610M Function Manual Download Page 73

Page: 73 / 80

RFID Reader Interface Reference

3.4 IRfReaderApi

Mobile Readers
Function Manual, 12/2010, J31069-D0198-U001-A2-7618

Other configuration parameters have an effect on how certain functions behave or whether a

feature can be activated or not. Mostly this applies to the trigger configuration.

Configuration Parameter

Name

Possible Values / Description

Info vs. Config

MobileOperatingMode

Enabled

This parameter tells you if the device is working in

remote mode (FALSE) or mobile mode (TRUE).
Whenever this parameter is false, you may only

monitor tag events. Only if this parameter is true,

filtering is enabled and tag events might be changed

and can be fed in again with the SetTagEvents API

function.

Info

EditTagEnable

This parameter could be used by your applications.
It signals that changing of tags is allowed inside your

application.

Info

ScanBeepEnable

Produce a sound on valid reads (if true).

Info

ScanResultTime

The configured scan time

Info

All of the following configuration parameters give information on how certain triggers are configured.

On the one hand they specify whether a configured trigger is only valid as long as the associated key

is pressed (KEY_PRESSED) or whether the trigger implements an ON/OFF toggling

(START_STOP).

This information is for information only.
Moreover, depending on the configuration, each trigger is associated with either RFID scanning or

barcode scanning or with both. This defines which function will be triggered and is thus relevant for

your client.
PistolGrip

Information about the pistol grip button

Config

Scan Key Left

Information about the scan key button on the left of

the device

Config

Scan Key Right

Information about the scan key button on the right of

the device

Config

Scan Key Top

Information about the scan key button on top of the

device

Config

Application

Information about the virtual software trigger

Config

Limitations

RF-MANAGER mode only.
There has to be valid RF-MANAGER configuration data available in order to successfully

retrieve values.

Version information

Supported in RFID Reader Interface: since V1.1

Summary of Contents for SIMATIC RF610M

















































































Search results

Summary of Contents for SIMATIC RF610M

Reviews:

Related manuals for SIMATIC RF610M

Brands by name

Popular brands

Siemens SIMATIC RF610M, Function Manual

Search results

Summary of Contents for SIMATIC RF610M

Reviews:

Related manuals for SIMATIC RF610M

Brands by name

Popular brands