Configuring Extension Unit PROFINET and PROFIsafe
4.8 Extension Unit PROFIsafe - Safety configuration
Extension Units KPxx
Operating Instructions, 05/2019, A5E43600360-AC
75
●
An F-runtime group exists. To check, select the Program blocks entry under the PLC in
the device view.
●
The input address of the Extension Unit PROFIsafe is evaluated at least once in the F-
runtime group.
The number of the F-I/O DB is located below the PROFIsafe parameters of the
Extension Unit PROFIsafe in the "F-I/O DB number" box, see figure below.
●
The Device view is open.
