Detailed descriptions
15.3 BIOS Setup
SIMATIC Rack PC IL 43
15-2
Operating Instructions, Edition 09/2005, A5E00432875-01
15.3
15.3
BIOS Setup
You can configure the system functions and hardware configuration in the BIOS.
The factory BIOS settings of the Rack PC deviate from the default BIOS settings as follows:
Tab
Option
Setting
Boot Options -> Post Errors
No Halt On Any Errors
Main
Boot Options -> Quiet Boot
Disabled
Peripheral Configuration -> USB
BIOS Supported Devices
Peripheral Configuration -> ATA
controller config > S-ATA mode
Peripheral Configuration -> LAN
Remote Boot
All
RAID (optional for RAID systems)
Disabled
Advanced
Hyper-Threading
Disabled (on Windows 2000 systems)
System Mode Config.
Performance
APM Interface
Disabled
APM Power saving
Disabled
ACPI Save to RAM
Disabled
Power
Power Failure Recovery
Always on
The Bios5-06.pdf manual on the supplied "Documentation & Drivers" CD shows you how to
access and change the BIOS setup. The manual also contains detailed descriptions of the
menus and setting options offered by the BIOS setup.
Notice
Updating the BIOS or calling the ”Default settings” function changes the BIOS settings. If this
occurs, configure the BIOS again according to the specifications in the table.
Pay special attention to the correct settings in the Power tab.
All menu items are disabled by default.
The operating system functions ”Save to RAM” (standby) and ”Save to Disk” (hibernate) are
not approved for the Rack PC.
Summary of Contents for simatic PCIL43
Page 2: ......
Page 44: ...Integration SIMATIC Rack PC IL 43 8 2 Operating Instructions Edition 09 2005 A5E00432875 01 ...
Page 111: ......
