Configuration
3.4 Making NAT settings
SINEMA Remote Connect - Client
24
Operating Instructions, 11/2017, C79000-G8976-C395-04
3.4
Making NAT settings
Activate NAT
1.
Enable the "Activate NAT on Client" option.
2.
Select a device in the list.
Result
NAT is activated. As default the NAT settings of the device are used. If you require different
settings, adapt the NAT setting.
If changes are made to NAT, existing VPN tunnels are closed. Click the "Open VPN tunnel"
button to re-establish the VPN tunnel.
Configuring destination NAT
1.
If you require certain settings, enable the option "Using manual NAT settings" and click
the "NAT configuration" button.
2.
Click the "NAT configuration" button.
3.
Configure the "Destination subnet".
Description
Network
Network address of the destination subnet
Subnet mask
The subnet mask matching the destination network.
4.
Configure the "Translated subnet".
Description
Network
Network address of the translated subnet into which the destination IP
address will be converted or translated.
Subnet mask
The subnet mask matching the network.
5.
Click the "OK" button to apply the changed settings.
Result
Destination NAT is configured. For the data packets to be sent to an IP address within the
destination subnet, the destination IP address is replaced by the suitable IP address from the
translated subnet.
Existing VPN tunnels are closed. Click the "Open VPN tunnel" button to re-establish the VPN
tunnel.
