![background image](http://html.mh-extra.com/html/siemens/simatic-net-sinema/simatic-net-sinema_operating-instructions-manual_383495021.webp)
Configuration
3.2 Start page
SINEMA Remote Connect - Client
Operating Instructions, 11/2017, C79000-G8976-C395-04
21
Device list
③
In the device list, you obtain the following information:
Box
Description
Participant
groups of the
device
The participant groups assigned to the device
Name of the
device
Name of the available device. The name is adopted from the settings of the SINEMA RC Server. If a
check box is displayed in front of the device name, the NAT function is enabled, refer to the section
"Making NAT settings (Page 24)".
VPN address VPN address of the device that the device receives from the SINEMA RC Server.
Remote sub-
net
The IP address of the remote subnet.
Virtual subnet The virtual IP address. Assuming that this is configured on the SINEMA RC Server.
Status
•
online: The device is connected
•
offline: The device is not connected
Location
Location of the device
Actions
Shows the actions enabled for this device.
Opens the WBM on the device
Only available with the type of connection "Wake-up SMS" or "Digital input & Wake-up SMS".
•
If the device is not connected, the SINEMA RC Server sends the wake-up SMS message to
the device.
Buttons
④
Activate NAT on
Client
A NAT IP address is assigned to the device in the remote subnet.
If you do not want to use the destination NAT settings of the device, enable the option "Use manual
NAT settings" and click on the button "NAT configuration".
When you enable or disable the option, existing VPN tunnels are closed. Click the "Open VPN tunnel"
button to re-establish the VPN tunnel.
To update the display in the device list, click the "Update" button.
NAT configurati-
on
See section "Making NAT settings (Page 24)".
Show log files
You receive the following log information. The path on which the log file is stored is shown in brackets.
•
SINEMA RC Client (C:\ProgramData\Siemens\Automation\SINEMA_RC_Client\logs\SRCClient.log)
•
SINEMA RC Service
(C:\ProgramData\Siemens\Automation\SINEMA_RC_Client\logs\srccService.log)
•
Open VPN Client (C:\ProgramData\Siemens\Automation\SINEMA_RC_Client\logs\openvpn.log)
Exit
The SINEMA RC Client application is closed.