Configuration
3.3 Making general settings
SINEMA Remote Connect - Client
22
Operating Instructions, 11/2017, C79000-G8976-C395-04
3.3
Making general settings
Local port settings
The local port settings are used for internal communication of the SINEMA RC client.
Adaptations are only necessary if there is a port conflict in the system.
1.
Select the port via which the OpenVPN service is addressed.
2.
Select the port via which the SINEMA RC Client service can be reached.
If you change the default port, existing connections are terminated. In this case, click the
"Open VPN tunnel" button again.
VPN proxy settings
A proxy is a communications interface in a network and serves as an intermediary between
the Internet and the network to be protected. The proxy receives queries from the client and
forward these to the relevant server via its own address. The address of the client is not
made known to the server.
In contrast to simple address translation using NAT, a proxy server can run communication
itself instead of passing on packets unseen to the recipient. You can find out whether your
proxy server supports OpenVPN from your network administrator.
If you use a proxy server, for example to reach a Web server via this in the remote subnet,
make the following settings:
User proxy settings Enable the check box to make the proxy settings (disabled as default).
Proxy type
Type of the proxy server
•
HTTP: Proxy server only for access using HTTP.
•
SOCKS: Universal proxy server
Server
Enter the address of the proxy server.
Port
Specify via which port via which the proxy server can be reached.
Authentication
Select an authentication method:
•
None: No authentication
•
Basic: Standard authentication. User name and password are sent unen-
crypted.
•
NTML: Authentication according to the NTML standard (Windows user
logon)
User name
If you have selected an authentication method other than "none", enter a user
name for access to the proxy server.
Password
Enter a corresponding password.
Confirm password
Confirm the password.
