Device Management
3.3 Inserting/Removing the CLP
For more information about configuring the device, refer to the
RUGGEDCOM ROS
Configuration Manual
associated with the installed software release.
3.3
Inserting/Removing the CLP
The RUGGEDCOM RST2228P accepts a CLP for storing configuration files and/or
software updates. A protective cover is provided to prevent the ingress of dust and
dirt when the CLP is not in use.
NOTICE
Mechanical/electrical hazard – risk of damage to the CLP
• Do not expose the CLP to extreme temperatures or humidity
• Do not expose the CLP to large magnetic or static electric fields
• Do not bend or drop the CLP
NOTICE
Security hazard – risk of unauthorized access and/or exploitation
Make sure to remove the CLP before decommissioning the device or sending the
device to a third-party.
NOTICE
Contamination hazard – risk of dust and dirt entering the CLP slot
When the CLP is not installed, make sure the protective cover is installed in its place.
Removing the CLP
To remove the CLP, do the following:
NOTICE
Configuration hazard – risk of data loss
After uploading or downloading a file, allow at least twenty seconds before
removing the CLP to ensure the data has been fully transferred.
RUGGEDCOM RST2228P
Installation Manual, 07/2021, C79000-G8976-1403-13
29