Siemens SIMATIC NET RUGGEDCOM RST2228 Installation Manual Download Page 7

Page: 7 / 58

Preface
Training

Other designations in this manual might be trademarks whose use by third parties

for their own purposes would infringe the rights of the owner.

Training

Siemens offers a wide range of educational services ranging from in-house training

of standard courses on networking, Ethernet switches and routers, to on-site cus-

tomized courses tailored to the customer's needs, experience and application.
Siemens' Educational Services team thrives on providing our customers with the es-

sential practical skills to make sure users have the right knowledge and expertise to

understand the various technologies associated with critical communications net-

work infrastructure technologies.
Siemens' unique mix of IT/Telecommunications expertise combined with domain

knowledge in the utility, transportation and industrial markets, allows Siemens to

provide training specific to the customer's application.
For more information about training services and course availability, visit

https://-

www.siemens.com

or contact a Siemens Sales representative.

Customer Support

Customer support is available 24 hours, 7 days a week for all Siemens customers.

For technical support or general information, contact Siemens Customer Support

through any of the following methods:

Online

Visit

http://www.siemens.com/automation/support-request

to submit a

Support Request (SR) or check on the status of an existing SR.

Telephone

Call a local hotline center to submit a Support Request (SR). To locate a lo-

cal hotline center, visit

https://w3.siemens.com/aspa_app/?lang=en

Mobile App

Install the Industry Online Support app by Siemens AG on any Android,

Apple iOS or Windows mobile device and be able to:
• Access Siemens' extensive library of support documentation, includ-

ing FAQs and manuals

• Submit SRs or check on the status of an existing SR
• Contact a local Siemens representative from Sales, Technical Support,

Training, etc.

• Ask questions or share knowledge with fellow Siemens customers

and the support community

RUGGEDCOM RST2228P

Installation Manual, 12/2019, C79000-G8976-1403-05

Summary of Contents for SIMATIC NET RUGGEDCOM RST2228



























































Search results

Summary of Contents for SIMATIC NET RUGGEDCOM RST2228

Reviews:

Related manuals for SIMATIC NET RUGGEDCOM RST2228

Brands by name

Popular brands

Siemens SIMATIC NET RUGGEDCOM RST2228, Installation Manual

Search results

Summary of Contents for SIMATIC NET RUGGEDCOM RST2228

Reviews:

Related manuals for SIMATIC NET RUGGEDCOM RST2228

Brands by name

Popular brands