Siemens SIMATIC NET CP 142-2, Manual, Page: 74 / 84

AS-i Master Module CP 142-2 B8976111/02
A-4
List of available master functions with FC "ASI_3422"
No. Function or call on the host interface (symbolic
representation) M1 Comment / Function implemented by /
Section
1 Image, Status = Read_IDI() X By the controller accessing the I/O interface
of the CP 142-2
2 Status = Write_ODI(Image) X By the controller accessing the I/O interface
of the CP 142-2
3 Status = Set_Permanent_Parameter(Addr, Param) X Set_Permanent_Parameter / 4.2.1.1
4 Param, Status = Get_Permanent_Parameter(Addr) X Get_Permanent_Parameter / 4.2.1.2
5 Status, GParam = Write_Parameter(Addr, Param) X Write_parameter / 4.2.1.3
6 Status, Param = Read_Parameter(Addr) X Read_Parameter / 4.2.1.4
7 Status = Store_Actual_Parameters() X Store_Actual_Parameters / 4.2.1.5.
8 Status = Set_Permanent_Configuration(Addr,
Config) X Set_Permanent_Configuration / 4.2.1.6
9 Status, Config =
Get_Permanent_Configuration(Addr) X Get_Permanent_Configuration / 4.2.1.7
10 Status = Store_Actual_Configuration() X Store_actual_configuration / 4.2.1.8.
Command also triggers cold restart on the
CP.
11 Status, Config = Read_Actual_Configuration(Addr) X Get_actual_configuration / 4.2.1.9
12 Status = Set_LPS(List31) X Set_LPS / 4.2.1.10
13 Status, List31 = Get_LPS() X Read lists and flags / 4.2.1.16
14 Status, List31 = Get_LAS() X Read lists and flags / 4.2.1.16
15 Status, List32 = Get_LDS() X Read lists and flags / 4.2.1.16
16.0 Status = Get_Flags() X Read lists and flags / 4.2.1.16
16.1 Status, Flag = Get_Flag_Config_OK() X CP error bit, LED display
Read lists and flags / 4.2.1.16
16.2 Status, Flag = Get_Flag_LDS.0() X Read lists and flags / 4.2.1.16
16.3 Status, Flag = Get_Flag_Auto_Address_Assign() X Read lists and flags / 4.2.1.16
16.4 Status, Flag = Get_Flag_Auto_Prog_Available() X Read lists and flags / 4.2.1.16
16.5 Status, Flag = Get_Flag_Configuration_Active() X Read lists and flags / 4.2.1.16
16.6 Status, Flag = Get_Flag_Normal_Operation_Active() X Read lists and flags / 4.2.1.16
16.7 Status, Flag = Get_Flag_APF() X CP error bit, LED display
Read lists and flags / 4.2.1.16
16.8 Status, Flag = Get_Flag_Offline_Ready() X Read lists and flags / 4.2.1.16
17 Status = Set_Operation_Mode(Mode) X igSet_operation_mode / 4.2.1.13
18 Status = Set_Offline_Mode(Mode) X Set_offline_mode / 4.2.1.11
19 Status = Activate_Data_Exchange(Mode) - not implemented