Siemens SIMATIC NET CP 142-2, Manual, Page: 6 / 84

B8976111/02 Contents
I-2
4.2.1.5 Store_Actual_Parameters 4-10
4.2.1.6 Set_Permanent_Configuration 4-10
4.2.1.7 Get_Permanent_Configuration 4-11
4.2.1.8 Store_Actual_Parameters 4-11
4.2.1.9 Read_Actual_Configuration 4-12
4.2.1.10 Set_LPS 4-12
4.2.1.11 Set_Offline_Mode 4-13
4.2.1.12 Set_Auto_Address 4-14
4.2.1.13 Set_Operation_Mode 4-14
4.2.1.14 Change_Slave_Address 4-15
4.2.1.15 Read Slave Status 4-16
4.2.1.16 Read Lists and Flags (Get_LPS, Get_LAS, Get_LDS, Get_Flags) 4-17
4.2.1.17 Read Total Configuration 4-19
4.2.1.18 Configure Total System 4-21
4.2.1.19 Write Parameter List 4-24
4.2.1.20 Read Parameter Echo List 4-25
4.2.1.21 Read Version ID 4-26
4.2.1.22 Read and Reset Slave Status 4-27
4.2.1.23 Read Slave ID 4-28
4.2.1.24 Read Slave I/O 4-28
5 Replacing a Defective Slave / Automatic Address Programming 5-1
6 Error Indicators on the CP 142-2 / Dealing with Errors 6-1
7 Configuring PROFIBUS DP When Using the BM141/BM142 7-1
A AS-Interface Protocol Implementation Conformance Statement (PICS)
B References
C Abbreviations