Siemens Simatic IPC647C Operating Instructions Manual Download Page 59

Page: 59 / 246

SIMATIC IPC647C
Operating Instructions, 12/2010, A5E02669337-02

Functions

9.1

Overview of the monitoring functions

Even in its basic version, the device comes with optional monitoring functions. When used in

combination with the appropriate software, the following functions for displaying, monitoring

and controlling are available:
●

Temperature monitoring (over-temperature, under-temperature or cable break at a

temperature sensor)

●

Fan monitoring (fan speed too low, fan failure, or a break in a tachometer line)

●

Monitoring of hard disks with S.M.A.R.T functionality even in a RAID system

●

Watchdog (hardware or software reset of the computer)

●

Operating hours meter (information on the cumulative run time)

●

RAID alarm display

●

AMT (Active Management Technology)

SIMATIC IPC DiagBase software

With the SIMATIC IPC DiagBase software (ships with the product), you can use these

functions for local monitoring. You can use the DiagBase Management Explorer application

for general monitoring or DiagBase Alarm Manager for notification of individual alarms.
The DMAPI programming interface and sample programs for the DiagBase software are

located on the DVD "Documentation & Drivers" in the directory "\Drivers\DiagBase\program

files\Siemens\DiagnosticManagement".
Additional information on the functionality of the SIMATIC IPC DiagBase software is

available in the online help.

SIMATIC IPC DiagMonitor software

The SIMATIC IPC DiagMonitor software can be ordered on CD (does not ship with the

product). It contains the networkable monitoring software, the software for the stations to be

monitored and a library for creating custom applications.

AMT (Active Management Technology)

AMT is a technology from Intel for remote maintenance of computers. You turn an AMT PC

on and off remotely and start the BIOS setup remotely. Different operating systems can be

booted with ISO files.

Summary of Contents for Simatic IPC647C























































































































































































































































Search results

Summary of Contents for Simatic IPC647C

Reviews:

Related manuals for Simatic IPC647C

Brands by name

Popular brands

Siemens Simatic IPC647C, Operating Instructions Manual

Search results

Summary of Contents for Simatic IPC647C

Reviews:

Related manuals for Simatic IPC647C

Brands by name

Popular brands