Siemens Simatic IPC647C Operating Instructions Manual Download Page 216

Page: 216 / 246

Appendix

A.2 Certificates and Approvals

SIMATIC IPC647C

216

Operating Instructions, 12/2010, A5E02669337-02

A.2

Certificates and Approvals

ISO 9001 certificate

The Siemens quality management system for all production processes (development,

production and sales) meets ISO 9001:2000 requirements.
This has been certified by DQS (the German society for the certification of quality

management systems).
Q-Net certificate no.: DE-001108 QM

Software License Agreement

The device can be supplied with or without preinstalled software. For devices with

preinstalled software, please note the relevant license agreements.

Approvals for the USA, Canada and Australia

Product safety

The following approval is available for the device:

Underwriters Laboratories (UL) to Standard UL 60950-1, Report E11 5352 and

Canadian Standard C22.2 No. 60950-1 (I.T.E).

Summary of Contents for Simatic IPC647C























































































































































































































































Search results

Summary of Contents for Simatic IPC647C

Reviews:

Related manuals for Simatic IPC647C

Brands by name

Popular brands

Siemens Simatic IPC647C, Operating Instructions Manual

Search results

Summary of Contents for Simatic IPC647C

Reviews:

Related manuals for Simatic IPC647C

Brands by name

Popular brands