Siemens SIMATIC IPC427E Operating Instructions Manual Download Page 51

Page: 51 / 164

Extended device functions

5.1 Monitoring Functions

SIMATIC IPC427E
Operating Instructions, 09/2017, A5E37454814-AB

5.1.3

Watchdog (WD)

Configuration

You configure the watchdog with the DiagBase or DiagMonitor software.

Function

The watchdog is able to monitor system runtime and informs the user about the different

reactions that are triggered if the system does not respond to the watchdog within the

specified monitoring time.
A watchdog alarm is retained after a restart and is only reset and logged by the DiagBase or

DiagMonitor software. The watchdog configuration is retained in the process.

Watchdog reactions

The following reactions can occur if the watchdog is not addressed within the set time:

Option

Reaction

Reset on

Executes a hardware reset when the watchdog expires

Reset off

Executes no action when the watchdog expires

Restart

Restarts the operating system when the watchdog expires

Shutdown

Shuts down the operating system when the watchdog expires

NOTICE
"Reset on" option
The "Reset on" option immediately triggers a hardware reset that may result in loss of data

under Windows and damage to the installation.

Watchdog monitoring times

The monitoring time can be configured with the DiagBase or DiagMonitor software.

Note
When you change the monitoring time, the change becomes effective immediately.

Summary of Contents for SIMATIC IPC427E





































































































































































Search results

Summary of Contents for SIMATIC IPC427E

Reviews:

Related manuals for SIMATIC IPC427E

Brands by name

Popular brands

Siemens SIMATIC IPC427E, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC427E

Reviews:

Related manuals for SIMATIC IPC427E

Brands by name

Popular brands