Siemens SIMATIC IPC427E Operating Instructions Manual Download Page 160

Page: 160 / 164

Glossary

SIMATIC IPC427E

160

Operating Instructions, 09/2017, A5E37454814-AB

Trusted Execution Technology

Hardware implementation that allows secured execution of programs and applications. It is

only effective when all relevant system components, such as processors, operating systems

and applications are supported.

Unified Write Filter

The Unified Write Filter is a configurable write filter that makes it possible to assign write

protection to data storage media.

Wake on LAN

Wake on Local area network. This function allows the PC to be started via the LAN interface.

Warm restart

The restart of a computer after a program was aborted. The operating system is loaded and

restarted again. The CTRL+ ALT+ DEL hotkey can be used to initiate a warm restart.

Summary of Contents for SIMATIC IPC427E





































































































































































Search results

Summary of Contents for SIMATIC IPC427E

Reviews:

Related manuals for SIMATIC IPC427E

Brands by name

Popular brands

Siemens SIMATIC IPC427E, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC427E

Reviews:

Related manuals for SIMATIC IPC427E

Brands by name

Popular brands