Siemens SIMATIC IPC427E Operating Instructions Manual Download Page 83

Page: 83 / 164

Device maintenance and repair

7.4 Installing the software

SIMATIC IPC427E
Operating Instructions, 09/2017, A5E37454814-AB

7.4.1.2

Restoring the factory state

You can restore the original factory software using the Restore function. The USB stick

contains the necessary images and tools for transferring the factory software to the hard

disk/SSD or memory card of your PC. The following options are available for restoring

software:

●

Restore the entire hard disk / SSD or memory card with drive C: (system) and drive D:

Use the "Restore entire hard disk" option.

●

Restore drive C: only This allows you to retain any user data on drive D: Use the "Restore

system partition only" option.

NOTICE
Data are deleted
When you select the "Restore entire hard disk" option, all data, user settings and

authorizations or license keys on the hard disk are lost. The hard disk is reset to the

delivery state with partitions "C:" and "D:".
If the "Restore system partition only" option is set, all files on drive C: (System) are deleted.

All data, user settings and existing authorizations or license keys on drive "C:" will be lost.

Drive "C:" on the hard drive is completely erased, reformatted and the original software is

written to it.

Procedure

Note
The "USB Boot" option has to be set to "Enabled" in the BIOS menu "Boot" so that the

device can boot from the USB stick.

Connect the USB stick to the device.

Restart the device.

Press <ESC> when the following BIOS message appears:

Press Esc for Boot Options

The BIOS selection menu is displayed when initialization is completed.

To boot from the USB stick, select the Boot Manager.

Select the USB stick in the Boot Manager and confirm the entry.

Select the Restore function and confirm the entry.

Follow the on-screen instructions.

Summary of Contents for SIMATIC IPC427E





































































































































































Search results

Summary of Contents for SIMATIC IPC427E

Reviews:

Related manuals for SIMATIC IPC427E

Brands by name

Popular brands

Siemens SIMATIC IPC427E, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC427E

Reviews:

Related manuals for SIMATIC IPC427E

Brands by name

Popular brands