Siemens SIMATIC IPC377E Operating Instructions Manual Download Page 95

Page: 95 / 124

Technical specifications

8.6 BIOS description

SIMATIC IPC377E
Operating Instructions, 2017/05, A5E40965249-AA

Launch PXE ROM
Follow the instructions below to set the PXE ROM.
1.

Select Launch PXE ROM with the arrow keys and press Enter key.

Select the Disabled or Enabled as you want and press Enter key.

Press F4 key and save the change.

Boot mode select
Follow the instructions below to select your boot-up screen.
1.

Select Boot mode select with the arrow keys and press Enter key.

Select the LEGACY or UEFI as you want and press Enter key.

Press F4 key and save the change.

Set boot priority

In set boot priority page, you can set the boot devices priority for all your boot devices.
Follow the instructions below to set the boot devices priority.
1.

Select boot priority you wish to change with the arrow keys and press Enter key.
The option screen opens.

Select the device category and press Enter key .

Press F4 key and save the change.

See the default priority for booting device below:

Boot priority

Device category

boot

HDD/SSD

boot

USB-Key

3rd boot

USB-FDD

4th boot

USB-CD/DVD

5th boot

USB-HDD

6th boot

Network (PXE enable)

Once bootable devices are attached, the following items show up.

Bootable device

Description

Hard Disk Drive BBS

Priorities

All the boot options that are configured as Hard Disk Drive are displayed in

this page. You can change the priority as similar as changing the main boot

option priorities. The 1st boot option has the highest boot priority and ap-

pears at the boot option priorities and boot order.

Floppy Drive BBS

Priorities

You can set the system boot order for floppy drives in this field. The 1st

boot option has the highest boot priority and appears at the boot option

priorities and boot order.

CD/DVD ROM Drive

BBS Priorities

You can set the system boot order for CD/DVD ROM drives in this field. The

1st boot option has the highest boot priority and appears at the boot option

priorities and boot order.

Summary of Contents for SIMATIC IPC377E





























































































































Search results

Summary of Contents for SIMATIC IPC377E

Reviews:

Brands by name

Popular brands

Siemens SIMATIC IPC377E, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC377E

Reviews:

Brands by name

Popular brands