Appendix BIOS
B.3 Advanced setup
SIMATIC IPC347E
Operating Instructions, 09/2018, A5E41134132-AE
105
3.
Use arrow key to switch the next item and input the day, hour, minute and second as you
need.
4.
Press F4 key and save the change.
Select Disabled in step two to disable the system wake on alarm event at a fixed time.
Wake system with Dynamic Time
Follow the below instructions to enable system wake on alarm event at a dynamic time. The
increase minute ranges from one to five.
1.
Select Wake system with Dynamic Time with the arrow keys and press Enter key.
2.
Select Enabled and press Enter key in the active window pop-up.
3.
Enter the increase minute as you need.
4.
Press F4 key and save the change.
Select Disabled in step two to disable the system wake on alarm event at a dynamic time.
Dynamic Digital IO
In the Dynamic Digital IO page, you can check and set the eight parameters of DIO0-DIO7.
Dynamic Digital IO
Follow the below instructions to set the Digital IO as the Input and Output.
1.
Select DIO0 Direction - DIO7 Direction separately with the arrow keys and press Enter
key.
2.
Select Input or Output as you need and press Enter key in the active window pop-up.
If you set the Digital IO to Output, you have to select Hi or Low to the corresponding
Output Level and then press Enter key.
3.
Press F4 key and save the change.
ACPI settings
ACPI parameters
ACPI parameters are disabled.
ACPI sleep state
With this feature, you can select which ACPI sleep state the system enters after the power
button is pressed. See the setup options for ACPI sleep state below:
Option
Description
Suspend Disabled
When the power button is pressed, the system disable the ACPI function.
S3 only (Suspend to RAM)
When the power button is pressed, the system enters S3 only (Suspend to RAM).
