Installing and connecting the device
3.2 Installing the device
SIMATIC IPC347E
30
Operating Instructions, 09/2018, A5E41134132-AE
Possible mounting positions
You can mount the device as follows:
●
Mounting with mounting brackets, horizontal
●
Mounting on device bases, horizontal
●
Mounting on telescopic rails
When telescopic rails are used for mounting, the device can be withdrawn fully from the
cabinet or rack. For detailed information on telescopic rails, see the sections "Technical
specifications of the telescopic rails (Page 80)" and "Dimensional drawing for the use of
telescopic rails (Page 74)".
The figure below shows the position of the mounting holes for angle brackets or
telescopic rails.
①
Threaded holes for 3A68-508 R&L telescopic rails from the company KING SLIDE
WORKS CO., LTD or other telescopic rails match the dimensional and technical re-
quirements.
CAUTION
Risk of short-circuit and electric shock
Some small widget or water may drop into the device from the holes in the rear of the
device.
Make sure the rear cover of device is vertical to the ground after mounted. Don't put
anything filled with liquid on top of the device.
CAUTION
Risk of physical injury
The device is too heavy to be mounted exclusively with the 19-inch brackets of the front
panel.
The device may fall down, injure people and get damaged.
Secure the device using additional measures. The mounting screws of the telescopic rails
may not protrude more than 5 mm into the device.
