Siemens SIMATIC IPC347E Operating Instructions Manual Download Page 74

Page: 74 / 148

Technical specifications

7.4 Technical data

SIMATIC IPC347E

Operating Instructions, 09/2018, A5E41134132-AE

7.3.3

Dimension drawing for the use of telescopic rails

Dimensions: mm

T1=Tolerances of ± (0.1mm)/(0.004")

T1=Tolerances of ± (0.3mm)/(0.01")

7.4

Technical data

7.4.1

General technical specifications

Note
Applicability of technical specifications
The following technical specifications only apply under the following conditions:

•

The default configuration of the device is not changed.

•

The device is in good working order.

•

The fan cover and filter mat are installed.

•

The device is closed.

Dimensions

481 × 177 × 509 (W × H × D in mm)
For detailed information on dimensions, refer to "Dimension draw-

ing of the device (Page 72)".

Weight

13.3 up to 17.0 kg; depending on the equipment

Supply voltage (V

)

100 V AC to 240 V AC (-10%, +10%)

Summary of Contents for SIMATIC IPC347E





















































































































































Search results

Summary of Contents for SIMATIC IPC347E

Reviews:

Related manuals for SIMATIC IPC347E

Brands by name

Popular brands

Siemens SIMATIC IPC347E, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC347E

Reviews:

Related manuals for SIMATIC IPC347E

Brands by name

Popular brands