Siemens SIMATIC IPC227G Operating Instructions Manual Download

Page: 52 / 106

Maintaining and repairing the device

6.3 Installing and removing hardware

SIMATIC IPC227G

Operating Instructions, 06/2021, A5E50059933-AA

Follow the steps below to install memory module on motherboard memory sockets:

Unscrew the marked four screws with a T10 screwdriver

on the back side of the device and remove the cover.

Unscrew the marked screw for protective conductor with a

T20 screwdriver.

Unscrew the marked six screws with a T10 screwdriver on

the interface panel of the device.

Unscrew the marked two spring screws with a T8 screw-

driver on the motherboard.

Unscrew the marked two screws on the power module and

unscrew the marked other five screws with a T10 screw-

driver on the motherboard.

Press the retaining clips outward in the direction of the

arrows to unlock the memory socket.

Summary of Contents for SIMATIC IPC227G











































































































Search results

Summary of Contents for SIMATIC IPC227G

Reviews:

Related manuals for SIMATIC IPC227G

Brands by name

Popular brands

Siemens SIMATIC IPC227G, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC227G

Reviews:

Related manuals for SIMATIC IPC227G

Brands by name

Popular brands