Siemens SIMATIC IPC227G Operating Instructions Manual Download

Page: 24 / 106

Installing and connecting the device

3.2 Mounting the device

SIMATIC IPC227G

Operating Instructions, 06/2021, A5E50059933-AA

3.2

Mounting the device

3.2.1

Mounting instructions

Note

If the equipment is used in a manner not specified by the manufacture, the protection

provided by the equipment might be impaired.

Note the following:
•

The device is approved for indoor operation only.

•

When the device is used in the area of Industrial Control Equipment in accordance with

UL61010-2-201, the device is classified as "Open equipment". Open equipment must be

installed within an enclosure which protects you from hazards, including mechanical

hazards, electrical shock and spread of fire.

•

Install the device only as one of the described permitted mounting positions.

•

For installation of control cabinet, observe the country-specific regulations.

•

All the external circuit of the device must be safe extra low voltage (SELV) circuit.

•

This device is designed for use in a normal industrial environment. Without additional

protective measures (such as the provision of clean air), SIMATIC Box PCs may not be

operated in harsh environments that are subject to caustic vapors or gases.

Summary of Contents for SIMATIC IPC227G











































































































Search results

Summary of Contents for SIMATIC IPC227G

Reviews:

Related manuals for SIMATIC IPC227G

Brands by name

Popular brands

Siemens SIMATIC IPC227G, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC227G

Reviews:

Related manuals for SIMATIC IPC227G

Brands by name

Popular brands