Siemens SIMATIC IPC227G Operating Instructions Manual Download

Page: 21 / 106

Installing and connecting the device

3.1 Preparing for installation

SIMATIC IPC227G
Operating Instructions, 06/2021, A5E50059933-AA

3.1.3

Permitted mounting positions

The following mounting positions are permitted:
•

Horizontal mounting position
The horizontal mounting position is the preferred position.

•

Vertical mounting position – upright mounting

Take into account the permitted temperature range for operation that depends on the

mounting position in accordance with the "Technical specifications (Page 66)" section.
Ensure that the following clearances measurements to another component or to a wall of the

enclosure are complied with:
•

Underneath of the device at least 100 mm

•

Side of the device at least 50 mm

Summary of Contents for SIMATIC IPC227G











































































































Search results

Summary of Contents for SIMATIC IPC227G

Reviews:

Related manuals for SIMATIC IPC227G

Brands by name

Popular brands

Siemens SIMATIC IPC227G, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC227G

Reviews:

Related manuals for SIMATIC IPC227G

Brands by name

Popular brands