Configuring the operating system
6.2 WLAN
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01
133
Note
If the HMI device has detected the WLAN network, the encryption and the authentication
process for this network will already be shown in the dialog box.
If necessary, you must also enter the appropriate password in the "Network key" text box.
After you have entered the password, it is shown in encrypted form.
1.
If necessary, select the encryption you are using under "Encryption".
2.
If necessary, select the required authentication process under "Authentification".
3.
If necessary, enter the password for the WLAN network under "Network key".
4.
If necessary, select the type of authentication protocol under "EAP type".
5.
Confirm your entries.
The dialog closes. The parameterized WLAN network is added to the list of preferred
networks.
If the HMI device is connected to the WLAN network, the WLAN network is put at the top
of the list of preferred networks.
Procedure for parameterizing list of preferred networks
1.
In the "WLAN" dialog box, "Wireless" tab, press Advanced... to open the "Advanced
Wireless Settings" dialog box.
