Siemens simatic hmi op7, Equipment Manual

Page: 148 / 196

B-6
Equipment Manual OP7, OP17
Release 04/99
Remedy: Cause Mes-
sage
314 S7 diagnostics buffer not present. The CPU has no diagnostics buffer
(hardware problem).
315 No information text available.
317 Input is password protected. Enter password.
318 Incorrect password entered when attempting to
log in.
319 An existing password was entered when editing
the password. Enter a different password.
320 You have attempted to alter the level of or delete
the supervisor password.
321 You have attempted to alter the level of an invalid
password. First enter the password then specify
the level.
322 The password entered is too short. Password must be at least three cha-
racters long.
323 You have pressed <– Statistics or Message Text
–> on a buffer screen but there is no entry for the
current message. ––
324 The entry number specified does not exist on the
selected screen. ––
325 The FM/NC (= MPI peer) has no alarm messages
buffer. A node does not have the required
functional capability.
326 You have attempted to collect a recipe number
other than the active recipe number from the
PLC. Select the appropriate recipe number.
327 There is no recipe number when a recipe is selec-
ted. Configure missing recipe or select a
different one.
328 Recipe number >99 when selecting a recipe.
329 The same number has been entered for source and
destination on the ”Data Record Transfer” screen. Enter differing numbers.
330 Full details of source and destination not entered
when initiating data record transfer function.
331 The data record specified as the source does not
exist.
332 Data record number >99 when selecting a recipe
screen.
333 Data record number not present when selecting a
recipe screen.
335 Information message: alarm message will be sup-
pressed.
336 No process screens have been configured.
337 No recipes have been configured.