15-1
OP27, OP37 Equipment Manual
Release 05/99
OP37 in DOS Mode
The OP37 is also designed for use in DOS mode. It can be used for different
applications. The default settings apply to operation with a configuration
created in ProTool. The OP37 can be used for applications which run under
both DOS or Windows. These applications might be:
programming software
a standard application or
a customized application.
In order that the OP37 can be used in DOS mode, a data medium, such as disk,
hard disk or PCMCIA hard disk must be available. Set one of these data media
as the boot medium in Setup. Also, connect a keyboard and possibly a mouse
as well. An MF2 keyboard can be connected to the front connector. A PS2 con-
nector is available at the rear of the OP37 for connecting a PS2 keyboard, and
there is another connector for connecting a PS2 mouse.
Use
Conditions
15
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com