Siemens SIMATIC Field PG P4 Manual Download

Page: 13 / 144

1-1

SIMATIC Field PG P4 Manual
A5E00180080-04

Important Notes

1.1

Safety Instructions

Caution

The safety instructions given on the backside of the title page of this manual must
be observed. Before adding to the Field PG P4’s functionality by expanding the
hardware configuration (see Chapter 4) observe the relevant safety instructions.

Notes on Inserting and Removing Modules

Modules containing electrostatically sensitive devices (ESDs) can be identified by
the following label:

Please observe and carefully follow the guidelines mentioned below when handling
modules equipped with electrostatically sensitive devices:

•

Always discharge your body’s static electricity before handling modules
equipped with ESDs (for example by touching a grounded object).

•

Devices and tools must be free of static electricity.

•

Always pull the power plug and disconnect the battery before connecting or
disconnecting modules (containing ESDs).

•

Touch modules fitted with ESDs by their edges only.

•

Never touch wiring posts or printed conductors on modules (containg ESDs).

Summary of Contents for SIMATIC Field PG P4

















































































































































Search results

Summary of Contents for SIMATIC Field PG P4

Reviews:

Related manuals for SIMATIC Field PG P4

Brands by name

Popular brands

Siemens SIMATIC Field PG P4, Manual

Search results

Summary of Contents for SIMATIC Field PG P4

Reviews:

Related manuals for SIMATIC Field PG P4

Brands by name

Popular brands