Siemens SIMATIC Field PG P4, Manual

Page: 111 / 144

Reinstallation of the Software
8-7
SIMATIC Field PG P4 Manual
A5E00180080-04
5. You have to acknowledge the “SIEMENS End User License Agreement” with
the F8 function key. Pressing ESC allows you to decline the agreement and
cancels the installation.
6. In the next screens you can select the components which are to be copied from
the CD to the hard disk. Transfer of at least the folder “I386” is necessary for
the Windows NT installation or setup.
7. Select the drive for data transfer. You can use the selected drive as the
installation drive for Windows. For the Windows setup, you need an available
disk space of approximately 300 MB on the installation drive for Windows.
Caution
By default, drive C: is used for the data transfer (Recovery).
Ensure that there is an available disk space of approximately 300 MB left on drive
C: after the selected recovery data have been copied.
8. Confirm the end massage box.
9. Start the Windows setup program
LW:\I386\WinNT.exe
LW is the drive where the recovery data have been copied.
You can find the information on installation of Windows NT on the Recovery CD in
the folder SUPPORT\BOOKS\.
Note
If you want to become an expert user of Microsoft Windows NT Workstation, see
the “Windows NT Workstation Resource Kit” Version 4.0 (is not included in the
package). It contains specific information for administrators who are responsible
for installing, managing, and integrating Windows NT Workstation in a network or
multiuser environment.