Siemens SIMATIC ET 200SP HA DQ 32x24VDC/0.5A HA, Manual

Page: 35 / 38

Diagnostics
message
Error code Assign‐
ment
Meaning Remedy
Channel/compo‐
nent temporarily
unavailable
1F
H
Module Firmware update is in progress or has been
canceled during the update. The module gen‐
erates no process and substitute values in
this state.
● Restart the firmware update
● Wait for firmware update
Module is faulty 100
H
Module Module is faulty Replace I/O module
Short-circuit to M 106
H
Channel Short-circuit of the actuator supply to ground
Only effective in the connected state: Output
value=1
Correction of the process wiring
Shutdown on
button activation
122
H
Module The output disable switch was activated. Pull module
Retentive memo‐
ry in carrier mod‐
ule defective
154
H
Module Fault detected in the memory block on the
carrier module during startup.
Replace carrier module
Retentive memo‐
ry in the terminal
block defective
155
H
Module Fault detected in the memory block on the
terminal block during startup.
Replace terminal block
Maintenance events
A maintenance event is generated for each maintenance required identified. The MT LED
lights up on the module.
Maintenance messages have no direct effect on the function of the module or digital outputs.
Table A-2 Maintenance messages, their meaning and possible remedies
Maintenance
message
Error code Assign‐
ment
Meaning / Cause Remedy
Retentive mem‐
ory in carrier
module defective
154
H
Module Fault detected in the memory block on the
carrier module during operation.
Replace carrier module
Retentive mem‐
ory in the termi‐
nal block defec‐
tive
155
H
Module Fault detected in the memory block on the
terminal block during operation.
Replace terminal block
A.2.4 Address space
Abbreviations
● "IB" stands for input byte, that is, the module start address in the input area
● "QB" stands for output byte, that is the module start address in the output area
● "DQn" stands for digital output n
● "QDQn" stands for the value status (QI) of digital output n
Drivers, parameters, diagnostics messages and address space
A.2 Parameters, diagnostics messages and address space without PCS 7
Digital output module DQ 32x24VDC/0.5A HA (6DL1132-6BL00-0PH1)
Manual, 09/2018, A5E39265993-AA
35