Product Overview
1.3 Using ET 200S Fail-Safe Modules
ET 200S Distributed I/O System - Fail-Safe Modules
Installation and Operating Manual, 08/2008, A5E00103686-07
17
Using the fail-safe power module PM E F pp DC24V PROFIsafe
Using the fail-safe power module PM E F pp DC24V PROFIsafe is only possible:
●
As of order number 6ES7151-1BA01-0AB0, Firmware version V1.1.1 or higher
●
As of order number 6ES7151-7FA01-0AB0, Firmware version V2.1.4 or higher
Use in Safety Mode Only
Fail-safe modules can only be used in safety mode. They cannot be used in standard mode.
Achievable Safety Classes
Fail-safe modules are equipped with integrated safety functions for safety mode.
The following safety classes can be achieved in safety mode by assigning appropriate
parameters to the safety functions in
STEP 7 with the S7 Distributed Safety or S7 F Systems
optional package, by combining certain standard and F-modules and by arranging the wiring
of the sensors and actuators in a specific way:
Table 1- 2
Achievable Safety Classes in Safety Mode
In accordance with IEC
61508
In accordance with EN 954-1
In accordance with ISO 13849
SIL2
Category 3
Performance Level (PL) d
SIL3
Category 3
Performance Level (PL) e
SIL3
Category 4
Performance Level (PL) e
See also
Configuring ET 200S with Fail-Safe Modules (Page 19)
Requirements for Sensors and Actuators (Page 37)
Applications for the 4/8 F-DI DC24V PROFIsafe Electronic Module (Page 113)
Input applications of EM 4 F-DI/3 F-DO DC24V PROFIsafe (Page 145)
