Back cover IP20
20
A5E34382870-AH, 04/2019
Opening and closing the interface cover
This section is valid for backplane covers IP20 with interface cover.
Note
The backplane covers IP20 for Multitouch devices do not have an interface cover.
The following section describes the opening and closing of the interface cover on the back cover IP20.
The data listed in the section "Technical Specifications" of the associated section "Validity (Page 14)" are only guaranteed if
the interface cover is closed.
Requirement
●
Backplane cover IP20 is mounted
Procedure
The following procedure is an example using the TP2200 Comfort. The procedure applies accordingly to all corresponding
devices listed in section "Validity (Page 14)".
Opening
1.
Remove the screws
③
and
④
.
The screws can be turned by hand and are fastened captive to the interface cover.
2.
Lift the interface cover, detach it at the positions
①
and
②
and remove it.
3.
Put down the interface cover.
The interfaces on the device are exposed.
Close
For closing, follow the steps for opening in reverse order. Tighten the knurled screws in as far as they will go.
